Troubleshooting of Abnormal Noise during the Operation of Bucket Elevator

1. The base plate and chain bucket of bucket elevator collide with each other: adjust the take-up device of base in order to stretch the chain.
2. The driving shaft and driven shaft key is flabby, the sprocket is drift, chain bucket collides with casing: the position of sprocket needs to be adjusted and the key needs to be stretched.
3. The guide plate collides with chain bucket: readjust the position of guide plate.

4. There are some materials mingled in the guide plate and chain bucket: enlarge the inputs angle of material inside the base.
5. The failure bearing causes inflexible operation of bucket elevator: the bearing need to be replaced.
6. The pieces of materials or other objects stuck in the casing: stop the operation of bucket elevator and remove the materials. 
7. Gear profile of sprocket (driving and driven sprocket) is abnormal: correct the gear profile of sprocket or replaced driving sprocket. 
8. Gear profile of driving sprocket and chain is out of order: the sprocket gear profile needs to be corrected. 
9. Drive chain idling: adjust the length of chain.
10. The casing is not installed properly: the full length of vertical alignment of casing needs to be adjusted.